Abstract
Abstract The mechanical properties, e.g. tensile modulus (at 0.1% strain), tensile strength at maximum point and corresponding elongation and breaking energy, as well as impact strength, of compression molded PMMA and PMMA filled with wood fibers (10%-40% by weight of composite) have been investigated. Optimization of molding conditions, (e.g. temperature, time, pressure and mixing aids) was carried out. In optimum conditions of mixing and molding, the effect of different parameters, (e.g. nature and concentration of coupling agents (isocyanates), coating treatment, nature of wood species in the form of various pulps) on the mechanical properties of the resulting composites were evaluated. PMPPIC having 2%-4% (by weight of polymer) was found to behave as a true coupling agent because modulus as well as the tensile and impact strengths were improved. Moreover, PMPPIC acted as a coupling agent even when it was used for treatment of PMMA and fiber or to precoat the fiber. A distinct effect of the morphology ...
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.