Abstract

There are some limitations in the application of tuff powder as a supplementary cementitious material (SCM). Exploring its feasibility in new fields will consume a large amount of silica-alumina mine solid wastes. This study has investigated the mechanical properties and mechanism in contact-hardening of tuff powder with a method of compression molding. The compressive strength of specimens was tested, and the X-ray diffraction (XRD), thermogravimetric analysis (TG), scanning electron microscopy (SEM), and Mercury intrusion porosimetry (MIP) methods were used to reveal the mechanism of contact-hardening of tuff powder from a micro-perspective. The results indicated that the compressive strength of specimens was higher when activated by sodium hydroxide compared to calcium hydroxide. Compared to calcium hydroxide, the compressive strength of TFS20 and TFF20 activated by sodium hydroxide was improved by 20% and 23%, respectively. The hydration degree of tuff powder was very low, with a water–cement ratio (w/c) of 0.15, while the hydration degree of coal gangue powder was higher. The results of TGA and SEM indicated that the sodium hydroxide had a better activating effect on slag and fly ash. Therefore, more C-S-H gels were generated in those samples activated by sodium hydroxide. Furthermore, the structure of samples was more compacted, and there was a reduction of porosity by 10% and 11% for TFS20 and TFF20, respectively, especially the proportion of harmful pores.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call