The Mechanical and Comfort Properties of Viscose with Cotton and Regenerated Fibers Blended Woven Fabrics

Abstract

The increasing demand of cotton and low production rate to fulfill the world requirements has boosted the production of regenerated cellulose based fibers. The purpose of this work was to compare the performance and comfort properties of regenerated cellulose fibers. For this purpose, cotton, viscose, tencel, modal, bamboo and viscose fibers were taken. Cotton and viscose of 100% and blends (50:50) of viscose with cotton and regenerated fibers were taken. Normal yarn of count 20 tex was made and plain woven fabric samples were made and then pre-treated. The Warp-wise and weft-wise tensile and tear strengths were recorded. In addition, the tests of air-permeability, moisture management and thermal resistivity were performed It is found that the viscose:tencel and viscose:modal blends give better mechanical and comfort properties than all other blends. Also, it is found that viscose:cotton blend gives the lowest mechanical and comfort properties out of all studied fabrics. It is concluded that viscose makes more suitable blend with tencel and modal which outperforms in mechanical and comfort properties than other blends. DOI: http://dx.doi.org/10.5755/j01.ms.24.2.18260