The main linac cavity for Cornell's energy recovery linac: Cavity design through horizontal cryomodule prototype test

Abstract

Future particle accelerators will require continuous wave operation of SRF cavities capable of supporting high beam currents. An example of this is the Energy Recovery Linac (ERL) at Cornell University, a next generation light source designed to run high currents (100mA) with a high bunch repetition rate (1.3GHz). Obtaining the beam emittance necessary to meet design specification requires strong damping of higher-order modes that can lead to beam breakup. We discuss the optimization and verification of the accelerating cavity. Next we show that an ERL constructed from the optimized cavity geometry – including realistic shape errors – can support beam currents in excess of 300mA while still maintaining beam stability. A niobium prototype 7-cell cavity was fabricated and tested in a horizontal cryomodule. We show that the prototype cavity exceeds quality factor and gradient specifications of 2×1010 at 16.2MV/m at 1.8K by 50%, reaching Q=(3.0±0.3)×1010. The prototype cavity also satisfies all design constraints and has a higher order mode spectrum consistent with the optimized shape geometry. At 1.6K, the cavity set a record for quality factor of a multicell cavity installed in a horizontal cryomodule reaching Q=(6.1±0.6)×1010.