Abstract

In principle, high-temperature superconducting (HTS) flux-pinning maglev has the advantage of self-stable levitation and is therefore a good development prospect as a new rail transit technology. The magnetic field intensity is one of the key factors affecting the levitation performance of single-grain bulk superconductors in the HTS maglev system. To date, however, most researchers have focused on the levitation performance of HTS bulk superconductors in magnetic fields within a permanent magnet guideway (PMG) configuration. The magnitude of the external working magnetic field provided by a PMG is limited to about 0.5 T at 77 K, given that the superconductor usually levitates at a typical working height of 10 mm above the PMG. Therefore, the weak magnetic fields generated by the PMG significantly limits the levitation performance of HTS maglev systems to that of the permanent magnet (PM). In this article, a superconducting magnet test bench was utilized to provide a 0–3 T external magnetic field (B) environment for the study of the levitation force in HTS single grains. The difference in levitation performance between YBaCuO (YBCO) and GdBaCuO-Ag (GdBCO-Ag) bulk superconductors under large, changing magnetic fields was studied systematically. The relationships between levitation force and magnetic field characteristics, including vertical magnetic field component (Bz), transverse magnetic field component (Br), and vertical magnetic field variation (ΔBz) were investigated. The result of variation curves about YBCO and GdBCO bulks' levitation forces under different ΔBz shows that the levitation force of the bulk, single-grain superconductors will reach saturation under a varying ΔBz environment (0.72 and 1.5 T). The values of ΔBz corresponding to the saturation positions are found to be independent of the sizes of the HTS samples. At the same time, GdBCO-Ag exhibits a levitation force that is 112.8% greater than YBCO in B = 3 T magnetic environment. As a result, it is demonstrated that the levitation potential of single-grain HTS bulks can be better exploited by optimizing the distribution of the magnetic field.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.