Abstract
The causes of long-term failure under practical conditions of use or storage of different types of fixed resistors commonly used in electronic equipment have been investigated. Some reported life tests have proceeded without interruption for almost four years. Carbon-composition (grade 2) resistors under load fail by slow thermal degradation of the resistive material. Drift of value may also occur if unloaded resistors of this type are stored in a damp atmosphere. Vitreous-enamelled wire-wound resistors made with fine wire may fail during tropical exposure both unloaded and especially when lightly loaded with direct current. This is owing to electrochemical corrosion taking place at faults in the vitreous coating. High-stability cracked-carbon (grade 1) resistors may fail rapidly under light d.c. load by electrochemical action if moisture condensation occurs and the protective paint or varnish coating is inadequate.Tests for long-term resistor stability are critically discussed.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Proceedings of the IEE - Part B: Electronic and Communication Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
