Abstract
The kinetics of crystallization of poly(ethylene terephthalate), PET, have been measured by FTIR spectroscopy using the absorbances of the crystalline and amorphous phase carbonyl bands at 1717 and 1727cm−1 to determine the fractional crystallinity as a function of time and isothermally over the temperature range 230–240°C. Both primary and secondary crystallization could be measured with similar accuracy limited only by the length of time over which the measurements were made.The primary and secondary crystallization time dependences were fitted to Avrami equations with n values of 2.0 and 1.0, respectively. The initial primary process was interpreted as due to two-dimensional spherulites restricted early in the crystallization by the thickness of the film sample, 1.5–3.0μm. Secondary crystallization was considered to be due to one dimensional thickening of lamellae produced in the initial production of the spherulites.FTIR spectroscopy was considered to have some advantages in measuring the development of crystallinity over other techniques, such as DSC and DTA, which measure the rate of crystallization and are limited by the sensitivity of the calorimeter to measure the rate of heat evolution.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.