The key role of unsaturated olefin content on polysulfides prepared via inverse vulcanization of waste plant oils for mercury removal from wastewater.

Abstract

Three waste plant oils (olive oil, coconut oil, and soybean oil) were utilized as monomer crosslinking agents to synthesize polysulfides by inverse vulcanization with elemental sulfur, for mercury removal from wastewater. NMR analysis showed that 92.1% of the olefins participated in the inverse vulcanization reaction, indicating that the quantity of unsaturated olefins in plant oil mainly affects the ring-opening ratio of sulfur for the formation of sulfur-based polymers. The experimental results showed that olive oil polysulfide (S-r-olive) achieved 100% Hg2+ removal within 2h at a pH of 6. The S-r-olive, S-r-soybean, and S-r-coconut exhibited adsorption capacities of 130.23, 42.72, and 28.08mg/g, respectively. The kinetic and adsorption isotherm illustrated that the Hg2+ adsorption by polysulfides conformed to the pseudo-second-order and Freundlich models, showing that the reaction rate constant of S-r-olive is approximately 14 times and 4.6 times greater than that of S-r-soybean and S-r-coconut, respectively. The adsorption mechanism is concluded that Hg2+ first enters the suspended S-r-olive by physical adsorption, then combined with sulfur to form HgS by chemical action and fixed in the S-r-olive adsorbent. This study demonstrates that utilizing waste plant oils as monomer crosslinking agents to synthesize adsorbents for Hg2+ removal is feasible and effective.