The Joule–Thomson effect of (CO2 + H2) binary system relevant to gas switching reforming with carbon capture and storage (CCS)

Abstract

The Joule–Thomson effect is one of the important thermodynamic properties in the system relevant to gas switching reforming with CCS. In this work, a set of apparatus was set up to determine the Joule–Thomson effect of binary mixtures (CO2 + H2). The accuracy of the apparatus was verified by comparing with the experimental data of carbon dioxide. The Joule–Thomson coefficients (μJT) for (CO2 + H2) binary mixtures with mole fractions of carbon dioxide (xCO2= 0.1, 0.26, 0.5, 0.86, 0.94) along six isotherms at various pressures were measured. Five equations of state EOSs (PR, SRK, PR, BWR and GERG-2008 equation) were used to calculate the μJT for both pure systems and binary systems, among which the GERG-2008 predicted best with a wide range of pressure and temperature. Moreover, the Joule–Thomson inversion curves (JTIC) were calculated with five equations of state. A comparison was made between experimental data and predicted data for the inversion curve of CO2. The investigated EOSs show a similar prediction of the low-temperature branch of the JTIC for both pure and binary systems, except for the BWRS equation of state. Among all the equations, SRK has the most similar result to GERG-2008 for predicting JTIC.