Abstract
The effect of the intermediate annealing on the abnormal grain growth after the light tension work and the grain coarsing after the medium rolling work (30-50% red) of Al with various impuritis and Al-Mg alloys were investigated.It was found out that only when the intermediate annealing temperature was high, the large grain size after the abnormal grain growth is appeared, and this was not caused by the impurity but the grain size before the light tension The grain coarsing after the medium rolling work was observed when the intermediate annealing temperature was relatively low, and this was caused by the impurities contained (perhaps Fe in Al).
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.