The Investigation of Proppant Particle-Fluid Flow in the Vertical Fracture with a Contracted Aperture

Abstract

Summary Proppant placement plays a crucial role in maintaining the conductivity of fractures after a hydraulic fracturing treatment. The process involves the transport of particles by fluid flow in complex fractures. Many studies have focused on proppant transport and distribution in the fracture with a constant aperture, but relatively few studies have investigated the proppant-fluid flow in a vertical fracture with a contracted aperture. In this work, we examine experimentally proppant transport in a fracture with a contracted aperture. The objective is to evaluate the distribution of particle beds in the contracted fracture at different flow conditions. In this paper, particle-fluid flow in the contracted fracture is studied experimentally by a laboratory size slot. A planar slot with a constant width is used to benchmark the experimental results, and a published correlation validates the bed equilibrium heights in the planar slot. Six types of particles are chosen to simulate the effects of particle density and size. The proppant distribution is evaluated by the bed height when the bed reaches the equilibrium states. The effects of fluid velocity, fluid viscosity, particle density, particle size, and particle volume fraction on particle distribution are investigated. The results confirm that the proppant particle-fluid flow in the contracted slot is more complicated than that in the planar slot. The phenomena of particle vortices and resuspension were observed at the contraction of the cross-section. The shape on the top of the bed is like a descending stair in which the height gradually decreases in the length direction. The bed height in the contracted slot is lower and more irregular than that in the planar slot at the same flow conditions. Smaller sands injected at a high flow rate and fluid viscosity can form a lower bed. The trend would be reversed by using denser particles and high particle volume fraction. A reliable model expressed by four dimensionless numbers is developed by the linear regression method for predicting the bed equilibrium height. The model and experimental results provide directions to quantitatively evaluate the particle transport and distribution in a fracture with a contracted aperture.