The interactive force between fat, oil, and grease (FOG) deposits and the effect of food waste disposers on kitchen drainage systems

Abstract

Food waste disposers (FWDs) streamline kitchen waste management and facilitate waste classification, whether they would increase the potential of blockage in kitchen drainage system is still unknown. This study conducted a theoretical analysis of the interactive forces between fat, oil, and grease (FOG) deposits and their aggregation on pipe walls. The study involved grading food waste particles processed by FWDs using sieving and weighing techniques to determine the mean weight diameter (MWD) of various aggregations. A full-scale experimental system, implemented in a 60-m high test tower, simulated blockages in horizontal pipes of high-rise buildings. The effect of pipeline materials and particle sizes on blockage were examined by measuring the adhesion of deposits on horizontal pipes. Energy dispersive spectrometer (EDS) analysis suggested that liquid bridge force is a primary factor in aggregate formation. Hand-cut particles formed aggregates with the highest MWD value. Particle size analysis revealed that sizes ranging from 2.36 to 4.75 mm, 1.18–2.36 mm, and 0.60–1.18 mm constituted over 80 % of particles ground by FWDs, with an average size of 2.16 mm. Results of full-scale experiment indicate particle diameters, friction coefficients and lipophilic coefficient significantly affected the propensity of these aggregates to adhere to pipes. Notably, particles processed by FWDs tended to cause blockages more frequently than hand-cut particles. These findings elucidate the deposition mechanism of FOG deposits and offer strategies to reduce blockages in kitchen drainage systems, such as reducing current grinding particle size by 18 % to 1.77 mm or selecting pipes like cast iron and high-density polyethylene.