Abstract
This research was study the effect of resistance spot welding process on physical properties. The specimen was mild steel sheet metal. The experiments with full factorial design. The factors used in this study are welding current, welding time and electrode force. The welded specimens were tested by tensile shear testing according to JIS Z 3136: 1999 and macro structure testing according to JIS Z 3139: 1978. The result showed that both of welding current, welding time and electrode force had interaction on tensile shear and nugget size at 95% confidential (P value < 0.05). Factors affecting the tensile shear and nugget size are the most welding current 10,000 amp., welding time 10 cycle and electrode force 1 kN. were tensile shear 7.13 kN. and nugget size maximum 6.75 mm. This research can bring information to the foundation in choosing the appropriate parameters to resistance spot welding process.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
