Abstract
A new test technique has been developed in order to characterise the skincore interfacial properties of a series of fibre reinforced sandwich structures similar to those presently being used in the marine industry. The technique involves peeling the lower surface skin away from the core in a controlled fashion. Four different glass fibre reinforced epoxy/balsa structures have been tested and the effect of incorporating various skin-core interlayers assessed. Tests were also undertaken on specimens that had been immersed in seawater for a period of forty-five days. The results indicate that the fracture energies associated with skin-core debonding are relatively high, typically 1000 J/m2. It has also been shown that neither a pre-treatment of the balsa core nor the incorporation of a layer of CSM fibres resulted in an improvement in the fracture energy of the interfacial region. Immersion in seawater for forty-five days resulted in a significant increase in the fracture toughness of this region. A subsequent examination of the fracture surfaces showed that fibre bridging between the GFRP skin and the balsa core was more extensive in the soaked samples.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
