The influence of unmalted barley on the oxidative stability of wort and beer

Abstract

The aim of this study was to investigate the influences of unmalted barley on the brewing process and the quality of the resulting beer-like beverages, with the main focus on the oxidative stability, using traditional beer analyses, GC-MS for the determination of aging compounds and electron paramagnetic resonance spectroscopy to determine free radical activity. For the investigation, brews with different barley proportions and 75% barley brews with a colour malt addition, to compensate for a lower colour using barley, were produced. In general, it can be said that beers with a proportion of up to 50% barley achieved a comparable or higher extract yield and final attenuation owing to the combined effectiveness of the malt and microbial enzymes. Although all analytical values were within the normal range according to Methodensammlung der Mitteleuropaischen Brautechnischen Analysenkommission (MEBAK), a slight decrease in total polyphenols and free amino nitrogen content was observed. Also in response to higher barley portions, an increase of higher molecular weight proteins and β-glucan was detected. Barley is not exposed to heat and oxidative stress in the malting plant, which explains the lower values of the thiobarbituric acid index and colour as an indicator of Maillard reaction products in the resulting wort and beer. Additionally, the results demonstrate a slower increase of aging compounds during beer storage with increasing barley proportions. Furthermore, it was observed that higher barley proportions led to a better oxidative stability indicated by a lower radical generation (T450-value) in wort and an increasing beverage antioxidant index/endogenous antioxidative potential (BAX/EAP value) in the final beverage. The case of ‘barley beers’ showed that the positive effect of barley on the oxidative beer stability was greater than the negative effect of the addition of colour malt, to adjust the colour of a 100% malt beer. In sensory comparison with beer produced with 100% malt, the beers brewed with a barley proportion up to 50% showed a slight flavour preference and up to a 75% equivalent evaluation. Copyright © 2012 The Institute of Brewing & Distilling