Abstract
The Zr modified aluminide coatings is an alternative concept for replacing Pt-modified aluminide bondcoat for thermal barrier coatings. In the paper the influence of process parameters on the chemical composition and the thickness of aluminide coatings will be presented. The zirconia-doped aluminide coating was deposited on turbine blades made from ZS6K nickel superalloy during the low-activity CVD process. In recent work the influence of turbine blade geometry on thickness of coating was observed. The thickest coating was observed on the trailing and leading edge on the blade cross-section. In the conducted research, the light and scanning electron microscopy were used as well as the EDS chemical composition microanalysis.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.