The influence of solid-liquid coefficient in the fate of pharmaceuticals and personal care products in aerobic wastewater treatment.

Abstract

Wastewater treatment plants (WWTPs) are considered to be a source of environmental contamination by micropollutants, especially from pharmaceuticals and personal care products (PCPs). The pathway of those compounds during sewage treatment has been investigated, but data from real-scale WWTPs is still missing (for example, the values of the solid-liquid coefficient (Kd) during treatment). This paper uses the Kd values for some pharmaceuticals and PCPs (fenofibrate, gemfibrozil, propranolol, metoprolol, salicylic acid, acetylsalicylic acid, ibuprofen, diclofenac, naproxen, fenoprofen, caffeine, triclosan, methylparaben, ethylparaben, propylparaben, butylparaben, and benzylparaben) to describe the micropollutants' behavior in the treatment process. In order to attain this data, an aerobic wastewater treatment plant located in Brazil was studied. Six samplings were carried out and a mass balance was performed, associating the concentrations of the micropollutants in the liquid phase with the solid phase (sludge and suspended solids). Of all the compounds analyzed, caffeine was the most biodegradable pollutant, as almost 98% of its mass was biodegraded. In contrast, triclosan had the highest load in sludge (median of 163.0mgday-1) and adsorbed in SS (median of 0.593mgday-1) at the output. Summing up, each micropollutant had a specific way to be removed during wastewater treatment.