Abstract
This research studied the effect of sodium bicarbonate content on the properties of epoxy. Sodium bicarbonate (SB) was used as foaming agent to improve the properties of thermosetting epoxy resin. The samples of epoxy foam were produced using mixing method. Sodium bicarbonate was selected as blowing agent by reason of the environmental friendly and low cost concern. Mechanical, physical and morphology properties were done. Sodium bicarbonate content was varied at 5, 10, 15, 20 and 25 part per hundred (phr), respectively. It can be highlighted that the optimum content of the SB was selected at 15 phr and it gave the moderate porosity percentage (%), and moderate value in mechanical and density properties, higher SB content exhibited lower flexural properties.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.