Abstract
The laser welding is usable method for joining thin plates with low energy input and precise penetration control. When joining of very thin sheets such as 0.5 mm the shape of the weld must be complete in order to achieve a good strength of the joint. The part of the test welds were welded without shielding gas and other part of the test welds by using 65 mm shielding gas nozzle behind the key hole. The strength of the laser weld of 0.5 mm Austenitic stainless steel (ASS) plate was measured in welds without shielding gas and Ar shielded weld. The strength of the shielded weld joints was significantly better than the joint weld without shielding gas due to convex shielded welds. In addition the shielded welds were bright which improves the corrosion properties of the joint.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
