Abstract
According to the production data of a rolling H-beam factory, the FE model of hot continuous rolling process of H-beam is built. With the FEM software of DEFORM-3D, the continuous rolling of H-beam was simulated. On base of simulation result, the metal flow and deformation law are discussed. Because of the flange and web is deformed in the different deformation zone, the metal flow law of flange and web is complex, especially the metal of the conjunction of flange and web. The exchange of metal between the flange and the web of H-beam alters to the different elongation ratio of flange and web. The other factors which influents on the metal flow , are taken into consideration, such as rolling speed and friction coefficient. By adjustment to the rolling parameters, the defect of the H-beam is reduced.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
