The Influence of Rattan Fibre Addition to The Compressive Strength of Normal Concrete

Abstract

Concrete is high in compressive strength but low in tensile strength and very brittle material. In this study, rattan fibre used as an added material to help eliminate the brittle properties of normal concrete. Variations of fibre used consisted of 0%, 0.5%, 1%, 1.5%, and 2% by weight of cement with mixed planning using the American Concrete Institute method. The compressive strength and stress-strain tests were carried out when the concrete was 28 days old, with a design compressive strength of 25 MPa as many as 15 pieces. The value resulting from testing on normal concrete without the addition of fibres is 24.94 MPa, 0.5% variation of rattan fibres is 23.23 MPa, 1% variation of rattan fibre is 25.3 MPa, 1.5% variation of rattan fibre is 25.85 MPa, 2% variation of rattan fibre is 23.59 MPa. Normal concrete compressive strength test showed an increase in strength at 1.5% rattan fibre and decreased at an additional 2%. The result of stress-strain test in normal concrete without rattan fibre is 0.00125, 0.5% of 0.00254, 1% of 0.00067, 1.5% of 0.00053, 2% of 0.00333. The stress-strain test shows that the addition of rattan fibre can help eliminate the brittle properties that are lacking in normal concrete in general.