Abstract
The effect of laboratory refining on de-inking potential of inkjet printed handsheets was investigated. Pulp samples containing 80% short fiber and 20% long fiber were beaten in a PFI mill to reach four predetermined freeness levels of 650 (unrefined), 550, 430, and 340 mL CSF, and then handsheets were made. Handsheets were identically inkjet printed and then de-inked. Results revealed that, at lower freeness value, the brightness of de-inked pulps was higher, but the opacity decreased. The surface roughness of handsheets produced using different refined pulp before de-inking was reduced. Our results showed that refining will impart a positive effect on handsheets’ de-inking potential, and de-inking printed papers produced from pulps refined to lower freeness generated the highest brightness. The results revealed that both tensile and tear strength indices of de-inked pulp were lower. However, the tear strength index of unrefined sample and the tensile strength index of pulp refined to 430 ml CSF were higher than for undeinked samples.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
