Year-end Sale % OFF 
Abstract
3D printing is a promising digital manufacturing technique that produces parts with layer by layer. The influence of process parameters is investigated for ABS material in fused deposition modelling (FDM). This work aimed to determine the surface roughness of 3d printed parts of the ABS material with varied parameters of infill height and infill density. The results of the test show that the, surface roughness is higher (11.6mm) at 20% infill density with 0.26mm infill layer height. Also, ABS material surface shows good finish (lower surface roughness) at 100% infill density with 0.06mm infill layer height. The infill layer height clearly visible under microscope at higher infill layer height with all the infill densities.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IOP Conference Series: Materials Science and Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
