Abstract
This paper presents a laboratory study on the use of cement kiln dust (CKD) as an activator of fly ash when used in high volumes within concrete. Two separate batches of fly ash and CKD were tested to assess the effect of material variability on binder properties and compressive strength gain. Ternary blends of fly ash (55–65%), CEM 1 (30%) and CKD (5–15%) and quaternary blends that included moderate amounts (15–18·5%) of ground granulated blast-furnace slag (GGBS) were prepared. Physico-chemical properties of individual binder materials were compared and concrete compressive strength was measured at 2 d, 7 d and 28 d. Ternary blends of 60% fly ash, 30% cement and 10% CKD resulted in moderate early age and 28 d strength and addition of GGBS enhanced strength significantly due to increased ettringite formation. Particle fineness, water demand and loss on ignition content of fly ash, and calcium oxide and sulfur trioxide content of CKD were found to be the main physico-chemical factors that influence compressive strength gain.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
