The influence of hot isostatic pressing on precipitates, mechanical properties of Mg-12Gd-0.8Zn-0.4Zr (wt.%) alloy manufactured by sand casting

Abstract

Microstructures and mechanical properties of Mg-12Gd-0.8Zn-0.4Zr (GZ1208K, wt.%) alloy under different treatments (as-cast: signed as nonHIP-GZ1208K, hot isostatic pressing (HIP): signed as HIP-GZ1208K) were characterized. Based on microstructure characterization, two prismatic precipitates, β′ and β1 precipitates, and one basal precipitate, γ′ precipitate, formed in both of nonHIP-GZ1208K and HIP-GZ1208K alloy. According to analysis, the area number density and the size of β′ precipitate could be adjusted through HIP treatment. The area number density of β′ precipitate increased after HIP treatment when aged at 32 h, and the size of β′ precipitate refined in both of the HIP-GZ1208K alloy aged at 8 h and 32 h. Except the influence of HIP treatment on microstructures, the ultimate tensile strength (UTS) and elongation of nonHIP-GZ1208K alloy also improved after HIP treatment. The UTS of the GZ1208K alloy aged at 8 h increased from 348 MPa (nonHIP-) to 371 MPa (HIP-) and the elongation increased from 2.6% to 4.7%. The density of the nonHIP-GZ1208K alloy increased after HIP treatment, that is to say the casting defects could be eliminated and the compactness of microstructures could be increased under the high pressure of HIP treatment.