Abstract
The influence of high temperature exposure on the mechanical and wear properties of selected HVOF sprayed CrC and No/Co – based alloy coatings were tested. Comparison of as-sprayed and 600°C/116 h annealed coatings’ microhardness, cohesive strength, abrasive and adhesive wear resistance showed that the Co-based Stellite 6 coating’s wear properties were deteriorated by heat exlosure despite of the increase of its hardness and cohesive strength. The heat exposure was found to be beneficial for both mechanical and wear properties of NiCrBSi self-fluxing coating. On the contrary, mechanical properties of Cr3C2-NiCr coating slightly decreased, while its wear resistance slightly increased as a result of high temperature exposure.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
