The influence of groundwater on surface flow erosion processes during a rainstorm

Abstract

AbstractSurface erosion rates on a disturbed natural soil in a 10 m indoor flume increased by an order of magnitude when a water table developed at a 10 cm depth during simulated rainstorms. Erosion rate increases did not correlate well with surface hydraulic flow conditions, and all significant erosion increases began before the full soil depth was saturated, before the water table reached the soil surface, and before seepage was possible. Groundwater influenced erosion processes primarily by increasing unsaturated pore‐water pressures and decreasing soil shear strength in surface rainflow, rather than through the direct entrainment of soil particles by seepage flow.There was no unique morphologic expression of the influence of groundwater during a rainstorm. Subsurface processes influencing surface erosion were detected only by appropriate subsurface instrumentation, which included micropiezometers, tensiometers and time domain reflectometry. Erosion rate increases occurred all along the slope, and were not concentrated at the base of slope due to a seepage zone. Soil depth was crucial to determining surface erosion increase. It is likely that confusing trends in surface flow erosion rates in past studies have occurred due to unrecorded groundwater development or an emphasis on seepage effects. Groundwater must be monitored along hillslopes under all moisture and soil conditions in order to avoid misleading and inconsistent conclusions derived solely from surface flow or seepage data. Copyright © 2002 John Wiley & Sons, Ltd.