Abstract
Tracked vehicles have been in use for many years ago thus, there has been increasing interest in articulated tracked vehicles for various applications such as they can be used as transporters for heavy equipment or as heavy earth-moving machines. Generally, it has been accepted that the wagon-type articulation of tracked vehicles is the simplest type of articulation. However, previous analysis has shown that this kind of articulation createsa problem to steering in the straightening-up position. This paper deals theoretically withthe possibility of changing the hydraulic piston, which used now in articulated tracked vehicles by a double acting hydraulic piston as another solution.It explains the effect of two forces of the piston on the outside tractive force and inside tractive force for the towing vehicle, when using a conventional wagon-type articulation of tracked vehicles with the introduction of double acting hydraulic piston in the system.It show that the length to the width ratio of the towing tracked vehicle is the main factor that affects much more than the other on the forces of the towing vehicle, where the value of this ratio (less than one) gives a good straighting up. Keywords: tracked vehicles, articulation of tracked vehicles, thrust force, hydraulic piston
Highlights
Towed tracked trailer analysis:The drawbar is hinged on the back of a powered tracked vehicle
Tracked vehicles have been used for years ago, and used in many applications such as military, construction, and agricultural, Bekker [1]
They developed equations of uniform turning motions of the tracked vehicle based on both the assumption that the pressure distribution beneath both tracks are modeled as concentrated forces acting under each road wheel, and the assumption that the friction between ground and track is Coulomb friction and constant
Summary
The drawbar is hinged on the back of a powered tracked vehicle. Towed vehicle represents the tracked trailer, or any other tracked vehicle with its engine out of power, like a knocked-out tank. Taking the positive values of m and introducing the dimensionless quantities Rdl and v ,,. The values of v show how the hinge force V varies with maximum attainable value of.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.