Abstract
A simple but effective solvent free method for the synthesis of platinum group metal nanoparticles on carbon nanotubes is presented. The initial work directly compares a typical wet chemical method and an organo-metallic chemical vapour deposition (OMCVD) technique for the production of 10 wt% Platinum on activated carbon and carbon nanotubes. The results obtained clearly showed that the wet chemical method produced materials with poorer physical-chemical characteristics and electrocatalytic activity. Also, carbon nanotubes were shown to be a more effective support regardless of the method of synthesis. Subsequent experimental work focused on the use of carbon nanotubes as a support, and the metal-organic chemical vapour deposition method as the synthesis technique. The method was successfully used to produce multiple samples with loadings of 20, 40 and 60 wt% Pt/CNT and a 40 wt% PtRu/CNT. HRTEM studies revealed stabilized clusters of platinum within CNT defects on samples synthesized using the OMCVD technique. The particle size distribution was relatively narrow, and the electrocatalytic activity was comparable or better than the benchmark Johnson Mathey 40 wt% Pt/C or 40 wt% PtRu/C.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have