The influence of annealing environment of ZnO thin film on its optical, structural and photovoltaics performance

Abstract

For inverted organic solar cells (IOSC), the interface contacts between the ZnO electron transport layer and the organic active layer play an important role in device performance and stability. The light absorption effect is one of the major disadvantages of IOSC when metal oxides are used as the electron transport layer (ETL). Oxide ETL primarily causes the above effect due to the energy barrier, deep level defects and excess carrier tunneling. In this work, we studied the effects of annealing ZnO films under various environmental conditions. ZnO films were synthesized by the sol-gel method, and the films were annealed at a temperature of 450 °C in air, an inert nitrogen gas (N2), oxygen (О2) and vacuum. SEM images and EDX spectra of the surface of thin ZnO films showed a change in thickness and the quantitative content of Zn/O elements. It was found that the annealing environment has a great influence on the morphology and thickness of ZnO films. Numerical calculations of the extinction, absorption, and scattering spectra of ZnO nanoparticles of different sizes are in good agreement with the results of measurements. Volt-ampere and electrical impedance measurements showed that ZnO films not only change the overall electrical resistance of devices to the contribution of the ZnO film resistance, but also change the electrical properties of the P3HT-PC61BM heterojunction.