Abstract
ABSTRACTAdhesion behavior between the composite films, consisting of UV cured Bis-GMA (Bisphenol A glycidylmethacrylate)/TEGDMA (triethylene glycol dimethacrylate) as a matrix and the ferrous oxide doped alumina particles, Al2O3 Fe, modified with 3-aminopropyl)tri – methoxysilane (AM) and methyl esters of linseed oil fatty acids (biodiesel – BD) used as a reinforcement, and metallic surface was investigated in this study. Al2O3 Fe-BD particles showed pronounced hydrophobicity and hydrolytic stability of alumina surface. Adhesive and mechanical properties of prepared composites, containing 0.5, 1.5 and 3 wt. % of surface modified Al2O3 Fe-AM and Al2O3 Fe-BD particles, were compared to the neat polymer matrix. Adhesion parameter was evaluated using the micro hardness testing method. The comparison of determined contact angle with adhesive parameter, obtained from micro hardness measurements, was discussed in relation to structural effect of reinforcement used.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
