Abstract
To study how changes in solute elements affect precipitation, six Al−Mg−Si alloys aged at 175 °C were investigated by transmission electron microscopy (TEM). In alloys with 1.3 at. pct solute, when the Si/Mg ratio exceeds 5/6, a sharp hardness peak appears after 3 hours that correlates with a high density of fine Guinier-Preston (GP) zones. A second, broader peak correlates with β″ precipitates and U phases. With high Si/Mg ratios, GP zones survive for long aging times. The β″-Mg5Si6 phase becomes very stable in the alloy with its Si/Mg ratio closest to 6/5. Deviation from this ratio increases fractions of β′, U-phases and disordered precipitates. In Mg-rich alloys less GP zones form and the first peak is suppressed. A coarse precipitate microstructure of β″ and β′ develops, the volume fraction being much higher than in Si-rich alloys. The Mg-rich alloys overage faster. Reducing the content of solutes causes alloys with high Si/Mg ratios to have a more Mg-rich behavior.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
