Abstract
BackgroundThe purpose of this in-vitro study was to examine the effect of incorporating different concentrations of Zirconium oxide-Titanium dioxide (ZrO2-TiO2) nanoparticles, which can have antibacterial properties, on the mechanical properties of an orthodontic adhesive.MethodsZrO2-TiO2 (Zirconium oxide, HWNANO, Hongwu International Group Ltd, China) -Titanium dioxide, Nanoshell, USA) nanopowder were incorporated into orthodontic adhesive (Transbond XT, 3 M Unitek, Monrovia, USA) with different concentrations (0.5% weight nonofiller and 1% weight nanofiller). The size of nanoparticle was 70–80 nm for ZrO2 and less than 50 nm for TiO2. For measuring the shear bond strength of the three groups of orthodontic adhesives [Transbond (control), Transbond mixed with 0.5% weight ZrO2-TiO2, and Transbond mixed with 1% weight ZrO2-TiO2], 30 freshly extracted human first premolars were used and bonded with stainless steel metal brackets (Dentaurum®, Discovery®, Deutschland), using the 3 orthodontic adhesives and 3 M Unitek; Transbond TM Plus Self-Etching Primer (10 samples in each group). The recorded values of compressive strength and tensile strength (measured separately on 10 samples of orthodontic adhesives (add the 3 D size of sample, light cured for 40 s on both sides) of each orthodontic adhesives), as well as the shear bond strength in Mega Pascal unit (MPa) were collected and exposed to one-way analysis of variance (ANOVA) and Tukey’s post-hoc tests.Resultsorthodontic adhesive with 1% weight ZrO2-TiO2 showed the highest mean compressive (73.42 ± 1.55 MPa, p: 0.003, F: 12.74), tensile strength (8.65 ± 0.74 MPa, p: 0.001, F: 68.20), and shear bond strength (20.05 ± 0.2 MPa, p: 0.001, F: 0.17).ConclusionsAdding ZrO2-TiO2 nanoparticle to orthodontic adhesive increased compressive strength, tensile strength, and shear bond strength in vitro, but in vivo studies and randomized clinical trials are needed to validate the present findings.
Highlights
The purpose of this in-vitro study was to examine the effect of incorporating different concentrations of Zirconium oxide-Titanium dioxide (ZrO2-TiO2) nanoparticles, which can have antibacterial properties, on the mechanical properties of an orthodontic adhesive
Other studies show that shear bond strength was not significantly different when tested over a period of time after orthodontic brackets bonding [4]
The objective of this study was to evaluate the effect of incorporation of ZrO2–TiO2 Nano fillers which can have antibacterial effect on mechanical properties of orthodontic adhesive; compressive strength, tensile strength, and shear bond strength
Summary
The purpose of this in-vitro study was to examine the effect of incorporating different concentrations of Zirconium oxide-Titanium dioxide (ZrO2-TiO2) nanoparticles, which can have antibacterial properties, on the mechanical properties of an orthodontic adhesive. Failure in the bonding system of orthodontic brackets will lead to frequent debonding of orthodontic brackets that delays treatment results. Shear bond strength of orthodontic composite resin is greater than resin-modified glass-ionomer cement and polyacid-modified composite resin [3]. Other studies show that shear bond strength was not significantly different when tested over a period of time after orthodontic brackets bonding [4]. Heat-curing and post-curing heat treatments both increase the degree of polymerization and improve the composite strength to some extent [8]. Nanofillers and fibers have been proposed as reinforcing fillers in dental composite, adding these fillers and fibers will result in increase in composite strength [9]
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have