The in situ treatment of synthetic musk fragrances in groundwater

Abstract

AbstractSynthetic musk fragrances (SMFs) have been shown to be micropollutants in various aquatic and groundwater systems, often occurring at microgram per liter concentrations. Studies have shown that the most commonly detected SMFs in water are nitro musks and polycyclic musks. The SMFs are typically introduced into the environment in continuous streams such as from wastewater and land application of wastewater or sludge generated during wastewater treatment. Various studies for the treatment of SMFs have been undertaken for wastewater but studies for the treatment of SMFs in groundwater are limited, especially for in situ treatment. A pilot‐scale test was conducted to determine if the use of colloidal activated carbon (CAC) could effectively reduce dissolved concentrations of nitro and polycyclic synthetic musk compounds including musk xylene, musk ketone, galaxolide, and tonalide. The pilot test was carried out downgradient of a septic system in Central Canada where a series of nitrification and denitrification reactions are occurring in an unconfined aquifer. A 10‐weight percent CAC solution was injected into a series of temporary direct push injection points to target the synthetic musk plume. The plume contained galaxolide and tonalide concentrations up to 687 and 187 nanograms per liter (ng/L), respectively, while the concentrations of musk ketone and musk xylene were below the method detection limit (20 ng/L). A total of 13,950 liters of CAC solution was injected during one injection event. The pilot test results indicated that the CAC was effectively delivered to the target injection zone resulting in an increase in total organic carbon concentrations within the saturated soil greater than two orders of magnitude compared to the background concentrations. Analyses of the groundwater chemistry before and post‐injection indicated that the CAC had no detrimental impact on the groundwater quality while reducing the concentration of dissolved galaxolide and tonalide within the plume to below the method detection limits within 51 days of injection with the exception of two of the 14 wells monitored which had galaxolide and tonalide concentrations up to 78 and 35 ng/L. Within 6 months of application, the concentrations of galaxolide and tonalide had decreased to below the method detection limits. Subsequent monitoring of the groundwater quality over a one‐year period failed to detect galaxolide and tonalide, suggesting that the CAC was effective in attenuating the galaxolide and tonalide.