Abstract

In our previous study, a new type of a one-side actuating diaphragm micropump was developed to drain water using diaphragm vibration at the rate of 1.2 ml/s [H.K. Ma, B.R. Hou, H.Y. Wu, C.Y. Lin, J.J. Gao, Development and application of a diaphragm micropump with piezoelectric device, Accepted by Microsystem Technologies (2007)]. This study indicates that the performance of the micropump is strongly affected by the design of the check valves and the pump chambers, input voltage, and frequency. The improved design shows that the maximum flow rate is 2.35 ml/s, and the maximum pump head is 6404 Pa under ± 50 V. In addition, the thermal resistances of the cold plate on a 30 W dummy heater in the open system and the circulation liquid cooling system are 0.27 °C/W and 0.45 °C/W, respectively, in laptop application.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.