Abstract

Pore-fracture connectivity is a critical factor in gas occurrence and transportation in shale plays. To investigate the limiting factors of multiscale pore-fracture connectivity, which might control methane occurrence and transportation in shale reservoirs, small-angle neutron scattering (SANS) under vacuum and high-pressure conditions incorporated with repeated mercury intrusion capillary pressure (MICP), and field emission-scanning electron microscopy (FE-SEM) imaging after Wood's metal (WM) impregnation were performed on overmature marine shale samples of the Wufeng-Longmaxi and Niutitang Formations from south China. Based on the electron micrographs of the WM-injected samples, it was found that the sealing of the pore system by brittle minerals is the root cause for a reduction in overall pore connectivity within the shale matrix. Aside from being favorable to the preservation of organic and clay mineral pores, brittle minerals however, resulted in the closure of pore network, thus, forming an isolated pore system. The novel approach of integrating repeated MICP measurement and FE-SEM imaging after WM impregnation provides a new evaluation method for pore-fracture connectivity of shale. The minimum fraction of pores within the overmature shales accessible to methane was at 38% and 78% within 100 nm. Moreover, because of confinement effects, the density of methane in a pore space less than 20 nm under high pressure was greater than that of an ideal gas under the same pressure conditions which even increased with decreasing of pore size to several times of its inert state and formed nanoscale methane clusters. The combination of contrast-matching SANS (CM-SANS) and repeated MICP measurements can effectively reveal the connectivity of pores within the matrix and the connectivity between such pores and microfractures, which helps to evaluate the distribution of closed pores and dominant transport spaces of gas in shale reservoirs. Overall, the pore-fracture connectivity in overmature marine shale controls the amount of gas that is supplied from matrix pores into fracture systems and also affects the density of the gas in pore spaces within the matrix.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call