THE IMPORTANCE OF PHEROMONE TRAP DENSITY AND TRAP MAINTENANCE FOR THE DEVELOPMENT OF STANDARDIZED MONITORING PROCEDURES FOR THE CODLING MOTH (LEPIDOPTERA: TORTRICIDAE)

Abstract

AbstractPheromone trap density is one factor which influences the magnitude of catch and therefore, should be standardized in a monitoring program. Trap catch increased with the area served by a trap, but reached a plateau when the trap density fell below one trap per 7 ha. From these data a quadratic regression was developed which relates the relative increase in trap catch to trap area. This relationship can be used to compare monitoring data obtained with different trap densities.The number of moths previously caught in a sticky trap can affect its future performance. In the Pherocon® 2 trap catches began to decline after a cumulative total of 20 to 30 moths and in the Pherocon 1CP after 50 to 70 moths. The catch totals causing a drop in trapping efficiency were correlated with the size of the adhesive catch surface. The cause for the loss in trapping efficiency appeared to be physical deterioration of the adhesive due to moth scales, other insect parts, or dust rather than an olfactory repellent factor. Trapping efficiency was restored by thoroughly stirring the soiled adhesive. Standard maintenance procedures should be followed to keep the adhesive quality of the catch surface constant and thereby prevent a reduction in catches. Tests with two pheromone dispensers, the Codlemone® rubber septum and the Conrel® microfibres, indicated that both are effective for at least 6 weeks. Codlemone septa resulted in higher catches during the first week of field use. During subsequent weeks there was no difference in attractiveness between the two pheromone lures.