Abstract
Usually, models describing flow and transport for sub‐surface engineering processes at the Darcy‐scale do not take into consideration the effects of pore‐scale flow regimes and fluid connectivity on average flow functions. In this article, we investigate the impact of wettability on pore‐scale flow regimes. We show that fluid connectivity at the pore scale has a significant impact on average flow kinetics and therefore its contribution should not be ignored. Immiscible two‐phase flow simulations were performed in a two‐dimensional model of a Berea sandstone rock for wettability conditions ranging from moderately water‐wet to strongly oil‐wet. The simulation results show that wettability has a strong impact on invading fluid phase connectivity, which subsequently influences flow transport resistance. The effect of invading‐phase connectivity and ganglion dynamics (GD) on two‐phase displacement kinetics was also investigated. It was found that invading phase connectivity decreases away from the neutrally wet (intermediate wet) state. This study provides evidence that GD accelerate fluid flow transport kinetics during immiscible displacement processes. Lastly, the impact of wettability on fluid displacement efficiency and residual saturations was investigated. Maximum displacement efficiency occurred at the neutrally wet state.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.