Abstract
In this study, the coatability of bolts with water-based zinc flake coating for the conditions in which electrostatic coating is not convenient was examined. In the sandblasting stage, two different types of sand were used to determine the impact of the sand type. When the results were compared, no significant difference was observed between the use of the two sand types. However, stainless-steel bolt usage was found to be more appropriate in terms of the filter maintenance of the sandblasting machine. At zinc-flake coating stage, the qualities of the bolts coated twice and coated thrice were compared to determine the impact of the coating number. According to tests of the dry adhesion, no coating error was detected on the both bolt surfaces. The corrosion resistance test showed that, the bolts with 24 g m-2 and 36 g m-2 coating weight had high corrosion resistance.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Latin American Applied Research - An international journal
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
