The impact of thixotropic behavior on microfluidic mixing in a staggered-herringbone mixer

Abstract

This study numerically explores the influence of thixotropy on flow and mixing in a staggered-herringbone micromixer (SHM), employing a structure-kinetics model to simulate the microstructure formation and breakup in thixotropic fluids. This study represents the first of its kind to incorporate a thixotropic fluid model into microfluidic mixing in channels with patterned grooves. Specifically, we examine the effects of the destruction factor (kd) and the thixotropy number (Th) on microstructure, flow, and mixing in the SHM, covering extensive ranges (0.01≤kd≤10 and 0.01≤Th≤100). Higher values of kd and Th, particularly for kd>1 and Th>1, lead to larger spatial variations of the structure parameter (λ) and viscosity (η), with a notable decrease in λ near the groove tops, leading to the lowest viscosity in these areas. Conversely, at the groove bottoms, where shear deformation is minimal, there is less reduction in λ, leading to increased viscosity and higher flow resistance. The viscosity variations inside the grooves impede lateral flows, adversely affecting mixing in the higher kd and Th regimes. Therefore, an in-depth understanding of the complex thixotropic behaviors, as influenced by kd and Th near the grooves, is essential for achieving effective mixing in the SHM when using thixotropic fluids. Our results suggest that lowering the channel height, for a given groove depth, slightly improves the mixing of thixotropic fluids. Further enhanced mixing is achieved by combining a reduced channel height with double-sided groove patterns.