Abstract
The real driving emission test using a portable emission measurement system is the advanced solution to assess NOx emissions from heavy-duty vehicles in recent years. To reflect the NOx emissions of heavy-duty vehicles more realistically, the restrictions on driving conditions will likely be relaxed in the next emission standard for heavy-duty vehicles. In this study, several tests with different payloads were conducted on a China VI heavy-duty vehicle under two different driving conditions. The test results show that some NOx emissions “spikes” may occur in any driving type during the tests of heavy-duty vehicles, and they are mainly related to the NOx conversion efficiency of the SCR system. In general, there is no obvious relevance between the NOx emission rate and the driving type, but the increase of the vehicle speed is beneficial to maintain the temperature of the SCR system in the high-efficiency zone, thus reducing the NOx emission rate. The variation of driving conditions will cause a change in the valid windows of the test, which will lead to a change in the evaluation results of NOx emission compliance. Adding motorway driving to the test route significantly increases the power threshold of the valid windows and reduces specific NOx emissions of the valid windows, with a minimum reduction of more than 30% and a maximum reduction of nearly 50% for “SENOx-90” in this study. The variation in driving conditions can severely affect the true NOx emissions assessment, especially for low-payload tests. In this study, the difference in NOx emissions assessed due to variation in driving conditions reached 1/3 of the total NOx emissions and the difference will gradually decrease as the vehicle load increases.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have