The Impact of Temperature and Switching Rate on Dynamic Transients of High-Voltage Silicon and 4H-SiC NPN BJTs: A Technology Evaluation

Abstract

This paper reports the application of silicon bipolar junction transistor (BJT) modeling techniques to the modeling of dynamic behavior of high-voltage 4H-SiC BJTs, and the experimental validation thereof. High-voltage silicon BJTs are impractical due to their low current gain that requires a bulky base driver. Emergence of high-voltage 4H-SiC vertical NPN BJTs with a tenfold higher gain enables the application of efficient drivers, with ratings close to those of IGBTs. This paper demonstrates the advantages offered by 4H-SiC BJTs by means of wide-scale measurements at 800 V and 10 A in a range of temperatures up to 175 °C and adjusted base driver switching rates. This paper shows that the turn- off storage delay in the SiC BJT is two orders of magnitude lower than that of the silicon device. It also shows that the turn- on switching transients of SiC device are by an order of magnitude and the turn- off transients are by two orders of magnitude faster than that of its silicon counterpart, resulting in a tenfold reduction of the switching energy. It also demonstrates the temperature dependence of switching transients of the silicon BJT, and the relative temperature-invariance of the SiC device's performance. This paper concludes with validation of the transient models for the 4H-SiC NPN BJT, showing that the model is sufficiently accurate for transient switching and loss calculations.