Abstract
Short wavelength rail defects or short-wave effects of rail have a significant influence on the system behaviour of railways. The influence of additional dynamic loads due to short-wave effects on component wear and the general quality behaviour of track is shown by several research papers. However, the described effect cannot yet be quantified comprehensively. This paper attempts to fill this gap. With the help of extensive data analysis, we can show that short-wave effects lead to a track geometry that is up to 50% worse than on average. Furthermore, we show examples illustrating the influence of untreated welded joints on the development of isolated defects of the track geometry. A detailed in-depth analysis of sections with different boundary conditions finally shows that short-wave effects have a significant influence on track geometry if the amplitude of the effect exceeds 0.15 mm. This value can be recommended as a threshold value in Austria and as a reference value in other countries.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
