Abstract

The purpose of this study was to establish the impact of season on productivity, labour consumption, and working time structure during timber harvesting from young alder stands (Alnus glutinosa Gaertn.). An early thinning process was performed in summer and winter in pure alder stands (38 and 40 years old) in the Płaska Forest Division (NE Poland). The felling and processing operations were performed by experienced loggers using the cut-to-length (CTL) system, and forwarding with manual loading and unloading involved the use of a Zetor 7045 (65 HP) farming tractor and trailer. In both summer and winter, the loggers spent most of their labour time on felling trees (approx. 23%) and bucking (approx. 36%). Assistant loggers spent most of their time stacking logs (49.2% in summer and 58% in winter). The most time-consuming activities in forwarding were loading, unloading, and transportation. The average time consumption of tree felling and processing amounted to 0.36 ± 0.11 h/m3; that of forwarding was lower, at 0.24 ± 0.07 h/m3. No statistically significant differences in the labour consumption of tree felling were identified between winter and summer (p = 0.863). For forwarding, labour consumption was significantly higher in winter (0.28 h/m3) than in summer (0.19 h/m3, p = 0.001). Average productivity was 3.02 ± 1.09 m3/h for tree felling and 4.76 ± 1.80 m3/h for forwarding. The productivity of felling was similar in winter (2.83 m3/h) and in summer (3.22 m3/h). For forwarding, productivity was significantly higher in summer (5.70 m3/h) than in winter (3.81 m3/h, p < 0.01).

Highlights

  • Chainsaws are a commonly used tool in timber harvesting [1]

  • Pentti [6] and Silayo and Migunga [7] list the following among the factors having an impact on productivity and time consumption in the timber harvesting process: age, species composition, volume of trees and stands, site type, terrain characteristics, and weather

  • According to the analysis of loggers’ specific tasks, there were significant differences between winter and summer in the times required for tree felling, delimbing, and transitions from tree to tree

Read more

Summary

Introduction

Chainsaws are a commonly used tool in timber harvesting [1]. The demand for timber continues to grow, driven by rapid economic development [4,5]. This requires innovative and more productive technology, ensuring rapid and safe harvesting of considerable volumes of material. Pentti [6] and Silayo and Migunga [7] list the following among the factors having an impact on productivity and time consumption in the timber harvesting process: age, species composition, volume of trees and stands, site type, terrain characteristics, and weather

Objectives
Methods
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call