Abstract
Macrolithotypes control the pore-fracture distribution heterogeneity in coal impacting stimulation via hydrofracturing and the coalbed methane (CBM) production. Given that it is affected by the discontinuities, hydraulic fracture geometry is complex in the vertical plane and is different from a simple fracture in a homogeneous reservoir. However, the initiation and propagation mechanism in the vertical plane is unclear. To clarify this, the cohesive zone finite element approach, with macrolithotype contributions included, was used to simulate and analyze the hydraulic fracture propagation. The experimental tests showed that, the bright and semi-bright coal usually have higher microfracture (cleat) density accompanied by the lower mechanical properties than that of the semi-dull and dull coals. The behavioral differences are likely to impact the geometry evolution of hydraulic fractures and which appears to vary when fracturing the different coal macrolithtypes. Thus, the cohesive zone finite element approach was used with two models to capture macrolithotype impacts. The result show that, when fracturing the dull coal (model 2), the overall propagation region rapidly displayed a simple plane in shape because of the less development of natural fractures. With the influence of the larger elastic modulus, the high-stress zone would be easy formed and suddenly release to generate pressure pulse when the hydraulic fracture penetrated the interface. As the hydraulic fracture initiates from the bright coal (model 1), the presence of the existing diverse cleat network contribute greatly to the increase of cracks number to form complex fractures. However, the opening of natural fractures will lead to the diversion of fracturing fluid, and the larger elastic modulus of the interlayer also plays a limiting role in the height of the hydraulic fracture. In addition, the monitoring of hydraulic fracture was carried out and shown that the height of the major fracture in model 1 was restricted and limited by the bright coal; and the height in model 2 is usually larger than the dull coal thickness, indicating that the hydraulic fracture has cut through the fracturing section (dull coal) and embedded into the upper and lower layers.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.