The Impact of Blade-to-Blade Flow Variability on Turbine Blade Cooling Performance

Abstract

The focus of this paper is the impact of manufacturing variability on turbine blade cooling flow and, subsequently, its impact on oxidation life. A simplified flow network model of the cooling air supply system and a row of blades is proposed. Using this simplified model, the controlling parameters which affect the distribution of cooling flow in a blade row are identified. Small changes in the blade flow tolerances (prior to assembly of the blades into a row) are shown to have a significant impact on the minimum flow observed in a row of blades resulting in substantial increases in the life of a blade row. A selective assembly method is described in which blades are classified into a low-flow and a high-flow group based on passage flow capability (effective areas) in life-limiting regions and assembled into rows from within the groups. Since assembling rows from only high-flow blades is equivalent to raising the low-flow tolerance limit, high-flow blade rows will have the same improvements in minimum flow and life that would result from more stringent tolerances. Furthermore, low-flow blade rows are shown to have minimum blade flows which are the same or somewhat better than a low-flow blade that is isolated in a row of otherwise higher-flowing blades. As a result, low-flow blade rows are shown to have lives that are no worse than random assembly from the full population. Using a higher fidelity model for the auxiliary air system of an existing jet engine, the impact of selective assembly on minimum blade flow and life of a row is estimated and shown to be in qualitative and quantitative agreement with the simplified model analysis.