The Impact of Atmospheric Plasma/UV Laser Treatment on the Chemical and Physical Properties of Cotton and Polyester Fabrics

Abstract

Atmospheric plasma treatment can modify fabric surfaces without affecting their bulk properties. One recently developed, novel variant combines both plasma and UV laser energy sources as a means of energising fibre surfaces. Using this system, the two most commonly used fibres, cotton and polyester, have been studied to assess how respective fabric surfaces were influenced by plasma power dosage, atmosphere composition and the effects of the presence or absence of UV laser (308 nm XeCl) energy. Plasma/UV exposures caused physical and chemical changes on both fabric surfaces, which were characterised using a number of techniques including scanning electron microscopy (SEM), radical scavenging (using 2,2-diphenyl-1-picrylhydrazyl (DPPH)), thermal analysis (TGA/DTG, DSC and DMA), electron paramagnetic resonance (EPR) and X-ray photoelectron spectroscopy (XPS). Other properties studied included wettability and dye uptake. Intermediate radical formation, influenced by plasma power and presence or absence of UV, was key in determining surface changes, especially in the presence of low concentrations of oxygen or carbon dioxide (20%) mixed with either nitrogen or argon. Increased dyeability with methylene blue indicated the formation of carboxyl groups in both exposed cotton and polyester fabrics. In the case of polyester, thermal analysis suggested increased cross-linking had occurred under all conditions.