Abstract
A study of the impact properties of DOP-26 iridium (which contains 0.3% tungsten and ∼40 ppm thorium) at temperatures of 600 to 1,440†C revealed that the predominant mode of failure for the material is intergranular separation with occasional transgranular cleavage. DOP-26 iridium also appears to have a high notch sensitivity, in contrast to most other face-centered-cubic (fcc) metals; at elevated deformation temperatures, the dislocation substructure is similar to that of other fcc metals. In addition, regular arrays of pure edge character dislocations have been found. In the test specimens used in this study, the presence of Ir5Th particles was observed within iridium grains. The existence of these particles indicates that the role of thorium is not well understood, particularly in light of the fact that previous studies, which depended on grain boundary segregation, have shown thorium to improve grain boundary cohesion.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.