Abstract
Abstract The 3 commercially available CrC-based powders with different kind of matrix (Cr3C2-25%NiCr; Cr3C2- 25%CoNiCrAlY and Cr3C2-50%NiCrMoNb) were deposited by HVOF JP-5000 spraying gun, evaluated and compared. The sliding wear resistance, measured at room and elevated (T=600°C) temperature according to ASTM G-133, the influence of heat treatment on the microstructure and properties, as well as the oxidation resistance in hot steam environment (p=24 MPa; T=610°C) were evaluated with respect to their potential application in steam power industry. The surface oxidation and microstructure changes were evaluated by SEM and XRD. The NiCr matrix proved to provide high oxidation and sliding wear resistance of the coating regardless volume content. On the contrary, the Cr3C2-25%CoNiCrAlY coating was subjected to massive oxidation of carbide particles. The low cohesive strength and high porosity of Cr3C2-25%CoNiCrAlY was identified responsible for its poor oxidation resistance in hot steam environment. The sliding wear resistance was found comparable at room temperature, regardless the matrix composition and content, while at elevated temperatures, the higher volume content of matrix led to higher wear of coating material.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
