Abstract

The excitation conditions of the magnetorotational instability (MRI) are studied for axially unbounded Taylor–Couette (TC) flows of various gap widths between the cylinders. The cylinders are considered as made from both perfect-conducting or insulating material and the conducting fluid with a finite but small magnetic Prandtl number rotates with a quasi-Keplerian velocity profile. The solutions are optimized with respect to the wavenumber and the Reynolds number of the rotation of the inner cylinder. For the axisymmetric modes, we find the critical Lundquist number of the applied axial magnetic field: the lower, the wider the gap between the cylinders. A similar result is obtained for the induced cell structure: the wider the gap, the more spherical the cells are. The marginal rotation rate of the inner cylinder – for a fixed size of the outer cylinder – always possesses a minimum for not too wide and not too narrow gap widths. For perfect-conducting walls the minimum lies at $r_{{\rm in}}\simeq 0.4$ , where $r_{{\rm in}}$ is the ratio of the radii of the two rotating cylinders. The lowest magnetic field amplitudes to excite the instability are required for TC flows between perfect-conducting cylinders with gaps corresponding to $r_{{\rm in}}\simeq ~0.2$ . For even wider and also for very thin gaps the needed magnetic fields and rotation frequencies are shown to become rather huge. Also the non-axisymmetric modes with $|m|=1$ have been considered. Their excitation generally requires stronger magnetic fields and higher magnetic Reynolds numbers in comparison with those for the axisymmetric modes. If TC experiments with too slow rotation for the applied magnetic fields yield unstable modes of any azimuthal symmetry, such as the currently reported Princeton experiment (Wang et al., Phys. Rev. Lett., vol. 129, 115001), then also other players, including axial boundary effects, than the MRI-typical linear combination of current-free fields and differential rotation should be in the game.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.